1. Add at least ½ cup / 118 mL of filtered water to the kettle. Do not fill above the “MAX” line. Wipe any water from the outside of the kettle and the base.
2. Put the lid on the kettle and make sure it fits securely. Place the kettle on the power base.
3. Plug in the cord. The button lights will blink, and the base will beep once.
4. Press (“ON / OFF”). The button will light up.
5. Press to choose a preset temperature setting. The button will light up, and the kettle will start heating up the water
6. Optionally, press (“HOLD TEMP”) any time before the kettle is finished heating. This will turn on Hold Temperature mode, which will automatically keep the kettle at the same temperature for 60 minutes after heating is finished. The button will stay lit during that time.
7. When the water is at the preset temperature, the kettle will beep 3 times and stop heating
Notes:
- Use filtered water for perfect pour over brewing.
- If you start the kettle without water in it, the kettle will turn off and controls will be disabled.
- The kettle will turn off after 1 minute of inactivity.
- You can only select 1 preset at a time.
- If you take the kettle off the base while heating, all buttons will turn off, and the kettle will pause heating. If you put the kettle back within 60 seconds, it will resume heating. After 60 seconds, the kettle will turn off.
- If you take the kettle off the base during Hold Temperature mode, the
(“HOLD TEMP”) button will blink. After 60 seconds, the kettle will turn off.
Original Electric Gooseneck Kettle